Power source

Welding wire feeder

Water cooling unit

Transport trolleys

Сable package

WELDING
EQUIPMENT
OF INDUSTRIAL
CLASS,
DEVELOPED
IN RUSSIA

MODULARITY

Modular architecture of power part

100%

Duty cycle 100%  at t=40 C  at the 
maximal current means that the welding unit operates non-stop

150 kHz, 6.7 ums

Extremely high response (inverter 
operation frequency and control system operation cycle)

ECE 96%

High energy efficiency

IP 34

Protection class guarantees safety of unit under harsh 
operation conditionsmaximal current means that the welding unit operates non-stop

Proprietary software

​

DIGITAL

Full digital control of all welding 
parameters

MIG
basic / pro Fe / pro Al

​

  • Simple and digital torchs;

  • Air or water cooling of the torch;

  • Remote control panel;

  • PRO version: synergetic programs for stainless and other steels, aluminum and programs with controlled transfer of electrode material without short circuit (pulse);

  • Option of manual control of welding parameters outside synergetic mode;

  • Welding modes for dots and tacks;

  • 2 cycle, 4 cycle welding modes;

  • Programs for root welds and thin materials;

  • DAC (Direct Arc Control) —short circuit control;

  • Program for compressed jet arc, with deep penetration (jet arc);

  • Special mode for vertical welds (rapid up);

  • Option of integrating hybrid processes;

  • Function of hot or soft start and crater filling;

  • Option of working in TIG Lift, ММА and gouging modes;

  • Color screen 5” with color selection on panel subject to lighting intensity and time of day;

  • Interactive intuitive control panel with remotely updated firmware;

  • Wi-Fi for documenting modes, re-programming, and identifying personnel;

  • Galvanised long-life body  and high duty trolley;

  • Large diameter trolley wheels.

TIG P DC
​
​

TIG DC pulsation welding implemented with low frequency (5 - 300 HZ) and high frequency modulation of welding current (15 000 Hz). The first one is used to form the weld, and the second one – to stabilise and concentrate arc.

​

Besides, two high frequency (1000—15000 Hz) welding modes which are required for independent fusion of filler and placing melted filler into the weld may be used.

 

In order to fuse electrode material, especially when welding thin sheet metal, more energy and more stable arc are required, because the welder feeds the filler with its hand. As the result, the electrode is positioned inaccurately. It is reached by high frequency modulation with high level average current of basic pulsation. It is easy accurately to place melted metal with a concentrated arc which is generated by using higher frequency of pulsation welding (up to 15 000 Hz) and low level of average current of additional pulsation.

See Details
TIG P AC/DC
​
​

WELDING METHODS

  • TIG DC-

  • TIG DC+

  • TIG AC 

  • TIG AC (Авто)

  • TIG ACϟDC [MIX]

  • ММА АС*

  • MMA DC

  • ММА Pulse**

__________________________

​​*   ММА АС is designed to weld the metal which tends to magnetic blowout.
** ММА Pulse is designed to weld vertical and vertical fillet welds. Advantage: upward welding without any oscillating motions of electrode. Reduction of welding time approx. by 30%.

​

​

MMA FUNCTIONS

  • Hot Start

  • Arc Force

  • Electrode coating:  rutile, basic, sour, cellulose

 

TIG FUNCTIONS

  • 2T/4T

  • HF (soft high frequency arc ignition)

  • Lift Arc (contact arc ignition)

​

See Details
See Details